CI 141-180 Contactors

CI141-180 Contactors
The contactor range CI 141-180 consists of one frame size with three NO main contacts and one auxiliary contact block with one NO and one NC auxiliary contact. Spare contacts are available and by maintenance, the moveable system blocks when removing the chamber. By replacing contacts, wire separation from terminals is not necessary. A long electrical lifetime makes the CI 141-180 contactors suitable for operation of all kinds of electrical loads in modern industry. Combined with a thermal overload relay or an electronic motor protection relay, the contactor switches and protects induction motors against overload and asymmetric load. A wide range of clip-on aux. contacts, timers, surge suppressors, mechanical interlock and marking plates makes the CI 141-180 programme very flexible and suitable both for OEMs and panel builders.

  • Compact design
  • Screw mounting
  • Power range 55 kW to90 kW
  • Basic modules with aux. contacts (1 NO + 1 NC)
  • For ac coil voltages
Contactor Coil Codes
22 110 V, 50 Hz / 120 V, 60 Hz
31 220-230 V, 50 Hz / 240 V, 60 Hz
37 380-400 V, 50 Hz / 440, 60 Hz

When ordering a Contactor please add the coil voltage code to the end of the order code.
For example 037H3081-22 = A 3 pole  – 110v 50 Hz contactor.

3 Pole Contactors
Order Code Type                   KW AC3 Amps AC3  
037H3081 CI 110 55 110 **Now Obsolete 
037H3339 CI 141 75 140  
037H3082 CI 180 90 180  

 

 

Data sheet