RT Spares

017-4030
017-403066

Standard Single-pole changeover switch (SPDT) with
terminal board proof against leakate current
Fitted in all standard versions of type RT.
Snap action changeover contacts.

017-4042
017-404266

Manual reset of unit after contact
changeover on rising pressure
For units with max. reset.

017-4041
017-40416666

Manual reset of units after contact
changeover on falling pressure.
For units with min. reset.

017-4240 
017-424066

Single-pole changeover switch (SPDT) with gold
plated (oxide-free) contact surfaces.
Increases cut-in reliability on alarm and monitoring
systems, etc.
Snap action changeover contacts.
Terminal board proof against leakage current.

017-4361 
017-436166
Polyamide RT Cover with Window
 
017-4362
017-436266
Pale grey RAL 7035 RT Cover without Window (above comparison pictures 017-4362 right hand side image)
 
017-4363 
 017-436366
 Replacement Pale grey Ral 7035 Setting knob
 
017-4360 
 017-436066

Black seal cap to replace setting knob so that
Setting can only be altered with tools

 

017-4251

 017-425166

Seal screws for cover and seal cap

 

017-4204 
 017-420466
Clamping band For all RT pressure switches with damping coil or other longer connections L= 392mm
 
017-4368
 017-436866
Conncetor with nipple Pipe thread ISO 228/1, G3/8 connector, nipple and AL washer (10 mm ext. 6.5 mm int. diam.) for welding or brazing on to steel or copper tubing
 
011L1101 
 011L110166
Connector 7/16 – 20 UNF connector for ¼ copper tube, brass, span of jaws 16
 
 017-4219
 017-421966
 Reducer Pipe thread ISO 228/1, G½A × G3/8, steel, span of jaws 22
 
060-3334 
060-333466
Adaptor Pipe thread ISO 228/1, G3/8 ×3/8 – 27 NPT with copper washer, brass, span of jaws 22
 
 060-3335
060-333566

Adaptor Pipe thread ISO 228/1, G3/8 A × ¼ – 18 NPT with copper washer, brass, span of jaws 22

 
060-3336 
060-333666
Adaptor Pipe thread ISO 228/1, G3/8 × ¼ – 18 NPT with copper washer, brass, span of jaws 22 
 
060-3240 
060-324066
Adaptor Pipe thread ISO 228/1, G3/8 A – G ¼ A, brass, span of jaws 17
 
060-3241
060-324166
Adaptor Pipe thread ISO 228/1, G3/8 A × R3/8 (ISO 7/1) brass, span of jaws 17
 
060-0190
060-019066

Damping coil – 0.50 m
Damping coil with 7/16 – 20 UNF connectors. Reducer code no. 017-420566 is
necessary if the damping coil is to be used with RT units having a pipe thread
ISO 228/1, G3/8 connection.

060-0191
060-019166

Damping coil – 1.00 m
Damping coil with 7/16 – 20 UNF connectors. Reducer code no. 017-420566 is
necessary if the damping coil is to be used with RT units having a pipe thread
ISO 228/1, G3/8 connection.

 

060-0192

060-019266

Damping coil – 1.50 m
Damping coil with 7/16 – 20 UNF connectors. Reducer code no. 017-420566 is
necessary if the damping coil is to be used with RT units having a pipe thread
ISO 228/1, G3/8 connection.

 

 
060-0193 
 060-019366

Damping coil – 2.00 m
Damping coil with 7/16 – 20 UNF connectors. Reducer code no. 017-420566 is
necessary if the damping coil is to be used with RT units having a pipe thread
ISO 228/1, G3/8 connection.

 

060-1047 
060-104766

Damping coil Pipe thread ISO 228/1, damping coils with G3/8 connector and 1.5 m                                                                                        copper capillary tube. Standard washers are supplied.

 

 060-3333
060-333366

Armoured damping coil Pipe thread ISO 228/1, damping coil with G3/8 connector and 1 m copper capillary tube. Standard washers are supplied.

 

017-4013 
017-401366
Air bell for liquid level control RT 113 Air bell, 62 mm diam. ext. × 204 mm length. Pipe thread ISO 228/1,

G3/8 connector and nipple (10 mm o.d./ 6.5 mm i.d.) for welding or brazing on
to steel or copper tubing. The air bell is of brass CuZn 37, W.no. 2.0321.