KP Temperature Spares

 
060-1055
060-1055
Wall Bracket (mounting screw and washers included)
 
 
060-1056
060-1056
Angle bracket (Mounting screw and washers included)
 
 
060-1057
060-1057
Seal screw for locking Plate (Seal screw according to DIN405, for locking of setting point)
 
 
060-1059 
060-1059
Screwed cable entry (Pg 13.5 with special nut. For 6-14 mm diameter cables.)
 
 
060-1097
060-1097
Top cover (for single control. If a wall or angle bracket is mounted on the backplate of the housing,                                                                     the KP will have an IP44 grade of enclosure by means of this cover.
 
 
 041E0114
041E0114
Heat-conductive compound (4.5 cm2 tube) For KPS thermostats with sensor fitted in a sensor pocket. Compound for filling sensor pocket to improve heat transfer between pocket and sensor.Application range for compound:between pocket and sensor.Application range for compound: –20 to +150 °C, momentarily up to 220°C.
 
 
017-4201 
017-4201

Sensor holder Sensor holder for wall mounting with four capillary tube
clips and 9-off 12 mm pins

 

 
060-0031
060-0031

Protective cap for KP thermostats.
To protect the unit against rain and humidity.
Grade of enclosure: IP 44
Material: Polyethylene
Max. ambient temperature: 65°C
Min. ambient temperature: −40°C